NP 205 Parking Brake Kit. Kit includes rotor, mechanical caliper w/pads, mounting brackets, and hardware.
NOTE: When installing kit on a u-bolt style yoke, a u-joint girdle kit will be included. When installing kit on a strap style yoke, typically the back side of the yoke is not perfectly flat and will need to be machined. The strap style bolt threads will also need to be tapped completely through the yoke.
Parking Brake Cable Clip (Each), 69-84 Blazer, 67-84 Suburban & Pickup. Black powder coated, sold individually.
This cable clip is used to hold the cable in the mounting bracket. The cable slips through the frame bracket hole and this clip sits in the groove of the end fitting to the backside of the bracket. These are made to the correct GM specifications.
Parking Brake Cable Connector (Each), 69-84 Blazer, 67-84 Suburban & Pickup. Two required per truck.
This is the correct GM round hole cable connector. Comes in Zinc Plated Steel. These connectors are used to connect the intermediate cable to the rear cables, or to join two cables together. Don't settle for the wrong square connector, this is an exact reproduction.
Description: Short E-Brake Cable Extensions (Pair)
Item #: 3111
Universal Mechanical Parking Brake Cable for NP205 Park Brake KitNew
Universal Mechanical Parking Brake Cable. For use with NP205 parking brake kit w/10" universal parking brake handle. Includes: Complete Cable with Stainless End Rods, Stainless Swivel Support Tubes, Stainless Cable, Clevis and Pin to attach to Caliper Brake Lever, Rear Bracket and Bolts.
*Comes in 6" increments for 24" to 60".
To measure, go from connecting point on brake lever to back side of U-joint Yoke and add 12 inches.