Motor City K5 - Axle Shafts

Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5" GM.Yukon Mighty seal.

Spicer 5-760X Axle U-Joint, 72-91 Blazer & Suburban, 72-87 Pickup. Non Greaseable

Commonly known as the "Large" axle u-joint.

Easy to spot on open knuckle front ends by measuring the bearing cap diameter.

Utilizes inside "C" Clips to lock u-joint in place.

Dimension A = 2.188 inches ( 2 3/16 inches )
Dimension B = 2.188 inches ( 2 3/16 inches )
Dimension C = 1.188 inches ( 1 1/16 inches )
Dimension D = 1.188 inches ( 1 1/16 inches )

USA Standard 4340 Chrome-Moly axle kit for '79-'87 GM truck & Blazer, GM 8.5", 30 spline

USA Standard 4340 Chrome-Moly axle kit for '79-'87 GM truck & Blazer, GM 8.5", 30 spline w/Super Joints

35.46" 30Spline INNER Left hand 8.5" 79 & UP GM Truck & BLAZER.

30 spline
35.46" long
Fits Dana Spicer 44 in 1988-1991 GM
Left hand inner
5-760X U-joint size
4340 Chromoly

19.15" 30spline inner Right hand 8.5" 79 & up GM truck & Blazer (4340).

30 spline
19.15" long
Fits Dana Spicer 44 in 1988-1991 GM
Right hand inner
5-760X U-joint size
4340 Chromoly

Yukon 1541H left hand inner axle for '79 and newer 8.5" GM truck and Blazer with a length of 35.46 inches and with 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.

30 spline
35.46" long
Fits GM 8.5" in 1988-1991 GM 1/2 ton truck
Left hand inner
5-760X U-joint size

Yukon 1541H replacement outer stub axle shaft for Dana 44 and 8.5" GM with a length of 9.94 inches and with 19 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H front axles come with a one year warranty against manufacturing defects.

Fits Dana Spicer 44 in GM truck and Blazer and Jeep Wagoneer with disc brakes
Outer stub
19 spline
9.94" from end of splines to center of u-joint bore

Yukon 1541H right hand inner axle for '79 and newer 8.5" GM truck and Blazer with a length of 19.15 inches and with 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.

30 spline
19.15" long
Fits GM 8.5" in 1988-1991 GM 1/2 ton truck
Left hand inner
5-760X U-joint size

Yukon 4340 Chrome-Moly left hand inner axle for '79 and newer GM 8.5" Blazer and truck with a length of 35.46" and 30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon's 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. "No Questions Asked" replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy's ring & pinion) makes final determination on warranty considerations.

30 spline
35.46" long
Fits GM 8.5" in 1979 and up GM 1/2 ton
Left hand inner
5-760X U-joint size
4340 Chromoly

Yukon 4340 Chrome-Moly right hand inner axle for '79 and newer GM 8.5" Blazer and truck with a length of 19.15" and 30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon's 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. "No Questions Asked" replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy's ring & pinion) makes final determination on warranty considerations.

Yukon Axle U-Joint for Dana44 & GM 8.5" Front (Each). Large 5-760x u-joint

Yukon Chrome-Moly Super Joint kit for Dana 30, Dana 44 & GM 8.5" front.

4340 Chromoly cross
Eliminated needle bearings results in larger trunion for added strength
Uses ultra high grade antiseize for lubrication
Not recommended for daily driven use
Kit includes two complete joints, eight full circle snap rings, grease and grease gun

(2) 297X 4340 Chrome Moly Super-joints. Replacement joints for Dana 30, Dana 44 & GM 8.5" front.

4340 Chromoly cross
Eliminated needle bearings results in larger trunion for added strength
Uses ultra high grade antiseize for lubrication
Not recommended for daily driven use
Two complete joints and eight full circle snap rings

Yukon front 4340 Chrome-Moly axle kit for '79-'87 GM 8.5" 1/2 ton truck and Blazer with 30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon's 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Spicer universal joints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. "No Questions Asked" replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy's ring & pinion) makes final determination on warranty considerations.

30 spline inner and 19 spline outer
Fits GM 8.5" in 1979-1987 GM 1/2 ton
Includes inner and outer 4340 Chromoly axles and Spicer U-Joints

Yukon front 4340 Chrome-Moly axle kit for '79-'87 GM 8.5" 1/2 ton truck and Blazer with 30 splines and Yukon Superjoints. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon's 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Yukon Superjoints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. "No Questions Asked" replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy's ring & pinion) makes final determination on warranty considerations.

30 spline inner and 19 spline outer
Fits GM 8.5" in 1979-1987 GM 1/2 ton
Includes inner and outer 4340 Chromoly axles and Yukon Super Joints

Yukon rebuild kit for Dana 44 Super Joint, ONE JOINT ONLY

Rebuild kit for Dana Spicer 30 and 44 and GM 8.5" Super Joint
Includes four caps, four zerk fittings, four o-rings and four full circle snap rings

Yukon Super Joints give you the ultimate in competition tough front axle u-joints

Yukon Super Joint for GM 8.5", Dana 30 & Dana 44. One single joint.